Detailed Product Description

The late-model SS-0627 wet blast unit is designed for the wet blast processing, driven by media pump and compressed air, of those parts which need a good finish.

 The machine is capable of processing the rough part surfaces-knocking off oxide, remaining salt and burr from casting or forging blanks, weldments and those parts having been heat-treated, punched or machined.It is suitable not only for the surface preparation for electro-plating and painting, but also for fulfilling the smooth finishing of those parts which have higher precision and smoothness and are grotesque in shape. And renovation is one of the machines capabilities.

 The machine can also operate with glass beads as media to harden part surface, serving the function of cold-work hardening.

2. Feature

   1). No dust during processing gets operators free of dust pollution endangering seriously their health.

   2). The machine demands neither ventilating, dust-removing equipments nor a separate room, but can be installed on the assembly line directly, thus saving operation area and facilitating the circulation of the parts.

   3). Featuring flexible operating methods and variable technological parameters, the machine is fit for the finish processing for various parts made of different materials and demanding different precision.

   4). Under reasonable technological parameters choice, the parts surfaces processed will be of higher quality. Generally speaking, their roughness values can be lowered by 1step than before processing. Part surfaces even can be finished to achieve a smoothness of 0.3 with the part surfaces hardened after processing, their resistance to wear and fatigue strength can be increased.

   5). Limited consumption of media.

   6). Major parts if the machine  last long and are easy in maintenance. With no dust and low noise, the machine provides comfortable operating environment.

3. Main technical data:

  1).   Electrical:

       Media pump motor:1.5kw,2840r/min,3N,50Hz,380v,IP44.

       Lighting: 3X20W fluorescent tube units,220V

       Control voltage: 220v

       Total power: No more than 2.5kw

  2)Abrasive:

      Type: silica sand

      Grain size: 80# (00.2mm)

      Media Charge: 600kg

    3)Turntable

       Size:400x300 mm

       Travel: Vertical 200mm(Manual)

     4) Blast Gun:

        Quantity: 1gun for manual

         Blast Nozzle Diameter: Φ3.2mm

         Air jet Diameter: Φ1.3mm

         Compressed air pressure: 0.60.65MPa

4.   Working conditions:

       1)     Power supply:3N,50Hz,380v,about 2.5kw

       2)      Compressed air source: Air Pressure 0.7Mpa, Displacement 1M3/minNormal state air flow (20,101.325kPa)